Digital Parking Assist System
The intelligent PDC integration
Digi4Park is the first aftermarket parking assist system that allows for the use of up to 8 digital sensors at a digital CAN bus interface. Depending on vehicle equipment, factory-fitted PDC graphics are displayed on the original monitor. The Digi4Park kit can also be universally installed in vehicles without CAN bus.
SENSORS AND TECHNOLOGY
Digi4Park uses the same digital sensors that are being factory-fitted by car manufacturers. In order to improve safety and quality, Digi4Park employs a dedicated digital bus to ensure an error- and interference-free signal transfer to the control unit.
CAN BUS OR UNIVERSAL MODE OPERATION
Digi4Park can process all necessary vehicular digital bus signals in CAN Bus mode. It can, however, also be used in UNIVERSAL mode in vehicles without CAN Bus.
The control unit can either be used for front- and rear sensors or rear sensors only. If needed, the expansion for the front sensors can be added to the order and retrofitted at a later date.
MANUAL PDC BUTTON
Digi4Park comes factory-fitted with a manual button. With this button the driver can at any time activate or deactivate (e.g. while pulling a trailer) the PDC operation and adjust the settings.
INTELLIGENT FUNCTION LOGIC
The Digi4Park system features an advanced and intelligent functionality. The system automatically self-activates once an obstacle closer than 1 meter is detected within the anterior perimeter.
THE WORLD'S SMALLEST SENSORS AT A MERE 12MM IN DIAMETER
The sensors can either be installed on the inside using a 14mm diameter hole or on the outside using an 18mm diameter hole.
4 REAR SENSORS, EXPANDABLE TO 8
The Digi4Park set ships with 4 sensors. The control unit supports a second zone of another 4 sensors and an additional display, for which we have an inexpensive EXTENDED KIT on offer.
UPDATES VIA USB
It is possible to update the Digi4Park software via the integrated USB port. When relevant updates are released, this option always guarantees an up-to-date software version.
From initial installation to daily routine use, the entire system ensures a comfortable and uncomplicated handling thanks to its control logic and perfect integration.
INSTALLATION OF THE SENSORS ON THE OUTSIDE OR INSIDE
Two different kinds of sensor mountings are part of the shipping contents. The sensors can either be installed on the outside or inside using the respective mountings depending on the bumper version.
The new c.LOGiC system "C4-LR12-NC"
The c.LOGiC multimedia interface allows for the connection of the aftermarket navigation system NAV-NKSUNIR4 plus 2 additional AV sources (e.g. DVD player, DVB-T tuner) to the 3rd generation Land Rover Touchscreen Infotainment System incl. touchscreen control functions for the NAV-NKSUNIR4 system and many DVB-T tuners and DVD players. It also supports the connection of a rearview camera. The video feed is displayed while driving (video activation).
1 - 2
"Intuitive Touch Control"
The latest interface version provides more precise controls, which allows for an even more comfortable use of connected navigation systems. A newly developed operating concept now allows for intuitive controls of a connected device (from a selection of over 50 different devices) via the 3rd generation Land Rover Touchscreen.
- Full plug and play multimedia interface
- 3 AV-inputs
- Controls of after-market navigation NAV-NKSUNIR4 and many more DVB-T tuners and DVD
players by factory touchscreen
- Rear-view camera input
- Rear-view camera power (+12V max. 1A)
- Automatic switching to rear view camera input
- Rear-seat-entertainment output for AV sources connected to the c.LOGiC
- USB update-port for software-updates by consumer
Compatible with Land Rover vehicles with touchscreen system 3rd generation.
Used inter alia in the following vehicles:
- Range Rover Evoque L538 (model years 2012- )
- Range Rover Sport L320 (model years 2012- )
- Discovery 4 L319 (model years 2012- )
The new c.LOGiC system "C4-LR12-NC"
Rearview camera interface for PCM3* and PCM3.1 system incl. video activation
The interface allows for the connection of an aftermarket rearview camera. The supplied plug & play cable kit ensures an easy installation of the interface. The necessary coding of the system is also supported. Perfect integration is achieved by both automatically switching to the camera feed whenever the gear is put in reverse and factory-fitted with them). The set also provides a switch output for the power supply of the connected camera and, as with most Caraudio-Systems products, the RL-PCM3-TF interface is updatable via USB.
* Only Porsche Cayenne PCM3
Rear view camera input
100% Plug & Play
Made in Germany
Video in motion
Who hasn't come across the fuel-efficient START-STOP automatic of modern vehicles and the unpleasant side effect it entails for the aftermarket community. But now CA-S has a solution for the nuisance of aftermarket car radios shutting down at startup:
The digital power booster stabilizes the operating voltage of connected electrical loads. The rapid voltage drop at startup (down to 8V at times) is being leveled to a steady voltage of 12V at output using smart circuitry. A microprocessor monitors the input voltage and regulates the power module until the targetted output voltage is reached, while filtering and compensating for unwanted voltage fluctuations or interferences.
● Stabilized 12V permanent power output ● Stabilized 12V ignition output
* New version with additional stabilized ignition output
+ 49 6239 50454-0
Caraudio-Systems Vertriebs GmbH ©2015